I would like to set up a 530-800 USg stirred tank of good quality lime slurry.
The slurry would then be injected directly into the water treatment installation with a metering pump at tank outlet and flow rates between .088058 USg/min and .44029100 USg/min, for a monthly consumption of 530-1100 USg of product (i.e., a residence time of 2 weeks to 1 month).
What type of equipment do you recommend?
tank materials: HDPE necessarily?
geometry: large-radius convex or conical bottom? particular ratio of height/diameter to be respected?
mixer: recommended suppliers? ratio propeller diameter/tank diameter of 1.65 ft is it sufficient?
metering pump and variable speed drive: recommended suppliers?